Extraction table for welding work, worksurface 1000 x 900 mm

Product description

• Direct extraction of harmful substances from the workplace. The workstations have an integrated air supply and extraction device. With the air supply device, the air flow is directed diagonally from the lower and upper edges of the workstation into the work area, so that the user is constantly in a shielded air zone. The pollutants cannot break through this wedge of clean air and therefore remain in the rear part of the workstation
• Due to the aerodynamically shaped baffles and the semi-open design, the air containing pollutants is optimally captured and extracted, even at low air volume flows, by means of the Coanda effect achieved.
• Workstations can be connected to a central extraction unit or can be set up as individual tables with a decentralised extraction system. Depending on the situation, further fans and filter systems are required for this purpose
• Extraction system for workplaces, incl. welding curtains and air supply unit
• The unit is quiet except for the suction noise, which depends on the air extraction fan. The air supply fan is below 50 dB(A)
• Worktop in 5 mm steel
• Connection cable with safety plug, approx. 5 m long
• Workplace light with adjustable angle, IO 65, 230 Volt
• Add on switch with socket, 230 Volt, side curtain rails in stainless steel
• Height adjustable feet (mech. + 70 mm)
• 2 x air inlet connection (DN 80), 1 x top air extraction connection (DN 200)
• Incl. earth and earthing connection
• Height adjustable feet (mech. + 70 mm)
• Sturdy tubular steel design in powder coated grey, RAL 7035, rear wall and deflector plates in anthracite, RAL 7016
• Delivered flat-packed, instructions included
• Delivery includes fresh air fan. This is supplied mounted on the workstation. The fan takes the air from the immediate vicinity of the workstation