Extraction table for grinding work, worksurface 2000 x 900

Product description

• Extraction system for workplaces, incl. curtains and air supply unit. With flow-optimised extraction tray and drawer
• Direct extraction of harmful substances from the workplace
• The unit is quiet except for the suction noise, which depends on the air extraction fan. The air supply fan is below 50 dB(A)
• Ready for connection to ventilation equipment
• Sturdy tubular steel design in powder coated grey, RAL 7035, rear wall and deflector plates in anthracite, RAL 7016
• Steel grid work surface, 20 mm thick, grid size 31/9 mm, load capacity 3.18 kN/m²
• Connection cable with safety plug, approx. 5 m long
• LED workplace light with adjustable angle, IP 67, 230 Volt
• Add on switch with socket, 230 Volt, side curtain rails in stainless steel
• Height adjustable feet (mech. + 70 mm)
• Air supply connection: 2 x DN 80 Extraction connection top: 1 x DN 200 (DN 250 for Model S 2000) Extraction connection bottom: 1 x DN 200
• Incl. earth and earthing connection
• Workstations can be connected to a central extraction unit or can be set up as individual tables with a decentralised extraction system. Depending on the situation, further fans and filter systems are required for this purpose
• Exhaust air connection spill pallet (bottom) right (for top view), if left is required, please indicate separately
• Due to the aerodynamically shaped baffles and the semi-open design, the air containing pollutants is optimally captured and extracted, even at low air volume flows, by means of the Coanda effect achieved.