Adhesive table with flat sump for adhesive work, worksurface 1000 x 900 mm

Product description

• Extraction systems for workplaces, incl. curtains and air supply unit
• Direct extraction of harmful substances from the workplace
• The unit is quiet except for the suction noise, which depends on the air extraction fan. The air supply fan is below 50 dB(A)
• Ready for connection to ventilation equipment
• Sturdy tubular steel design, powder coated in grey RAL 7035
• Worktop, screen print plate, 19 mm thick
• Connection cable with safety plug, approx. 5 m long
• Incl. vertical blinds at the side, PVC clear
• Add on switch with socket, 230 Volt, side curtain rails in stainless steel
• Height adjustable feet (mech. + 70 mm)
• Incl. earth and earthing connection
• LED workplace light with adjustable angle, IP 65, 230 Volt
• Workstations can be connected to a central extraction unit or can be set up as individual tables with a decentralised extraction system. Depending on the situation, further fans and filter systems are required for this purpose
• With space-creating, flat flow-optimised spill pallet
• Suction is air volume-optimised from the flat spill pallet downwards, DN 200
• Extraction from the rear wall upwards, DN 200
• Harmful substances are captured, even at low air flow rates
• Due to the aerodynamically shaped baffles and the semi-open design, the air containing pollutants is optimally captured and extracted, even at low air volume flows, by means of the Coanda effect achieved.
• Workplace light with adjustable angle, IP 65, 230 Volt, without socket and light switch