Spark-free Tools for EX-Zones

Combi spanner set, 12 piece, SW 10-32 mm, special bronze, spark-free, for Ex zones

£577.00 Excl. VAT

Tyre lever 200 mm, special bronze, spark-free, for Ex zones - 1

Tyre lever, special bronze, spark-free, for Ex zones

5 variants available

from £82.50 Excl. VAT

Spray booth scraper 235 mm, special bronze, spark-free, for Ex zones

£59.00 Excl. VAT

Phillips screwdriver, Size 1, copper beryllium, spark-free, for Ex Zones - 1

Phillips screwdriver, copper beryllium, spark-free, for Ex zones

5 variants available

from £21.50 Excl. VAT

Ratchet set 1/2",27 piece, 10-32 mm, special bronze, spark-free, for Ex zones

£1,959.00 Excl. VAT

Clay pick with handle 500 mm, special bronze, spark-free, for Ex zones - 1

Clay pick with handle, special bronze, spark-free, for Ex zones

3 variants available

from £204.00 Excl. VAT

Knife, 300 mm, reinforced design, special bronze, spark-free, for Ex zones

£85.00 Excl. VAT

Putty knife, blade 25 x 150 mm, special bronze, spark-free, for Ex zones - 1

Putty knife, blade 150 mm, special bronze, spark-free, for Ex zones

3 variants available

from £50.50 Excl. VAT

Scoop shovel with D handle, 240 x 290 x 1150mm, special bronze, spark-free, for Ex zones

£204.00 Excl. VAT

Frankfurt shovel 240 x 300 x 1600 mm, special bronze, spark-free, for Ex zones

£177.00 Excl. VAT

Heavy duty side cutter, 190 mm, copper beryllium, spark-free, for Ex zones

£264.00 Excl. VAT

Hex socket wrench with handle, 3.5 mm, copper beryllium, spark-free, for Ex zones - 1

Hexagon socket wrench with handle, copper-beryllium, spark-free, for Ex zones

19 variants available

from £40.00 Excl. VAT

Ratchet set 1/4” 16 piece, 4-14 mm, copper-beryllium, spark-free, for Ex zones

£833.00 Excl. VAT

Hook wrench Ø 58 - 62 mm, special bronze, spark-free, for Ex zones - 1

Hook wrench, special bronze, spark-free, for Ex zones

3 variants available

from £50.50 Excl. VAT

Needle 3 x 180 mm, copper beryllium, spark-free, for Ex zones

£19.60 Excl. VAT

Combination wrench 10 mm, extra long, special bronze, spark-free, for Ex zones - 1

Combination spanner, extra long, special bronze, spark-free, for Ex zones

13 variants available

from £41.50 Excl. VAT

Workshop screwdriver, straight shaft, 3 x 75 mm, copper beryllium, spark-free, for Ex zones - 1

Workshop screwdriver, straight shaft, copper beryllium, spark-free, for Ex zones

5 variants available

from £32.00 Excl. VAT

Hex wrench socket, 1/2” x 10 mm, special bronze, spark-free, for Ex zones - 1

Hex wrench socket, 1/2", special bronze, spark-free, for Ex-zones

29 variants available

from £32.00 Excl. VAT

Hex wrench socket for impact wrenches, 1/2" x 10 mm, special bronze, spark-free, Ex - 1

Hex wrench socket for impact wrenches, 1/2", special bronze, spark-free, Ex

17 variants available

from £52.00 Excl. VAT

Ballast shovel with D handle, 280 x 380 x 1150 mm, special bronze, spark-free, for Ex zones

£314.00 Excl. VAT

Hex pin wrench set with ball head, long, 1.5-10mm, copper beryllium, spark-free, for Ex zones

£417.00 Excl. VAT

Hex wrench socket, 1/2” x 10 mm, extra long, special bronze, spark-free, for Ex zones - 1

Hex wrench socket, 1/2”, extra long, special bronze, spark-free, for Ex zones

8 variants available

from £52.00 Excl. VAT

Pipe wrench, 250 mm, inner thread, copper beryllium, spark-free, for Ex zones

£275.00 Excl. VAT

Frankfurt shovel with D handle, 240 x 340 x 1150mm, special bronze, spark-free, for Ex zones

£217.00 Excl. VAT

Hex pin wrench set, 1, 5-10 mm, special bronze, spark-free, for Ex zones

£142.00 Excl. VAT

Combination wrench 10 mm, offset, special bronze, spark-free, for Ex zones - 1

Combination spanner, offset, special bronze, spark-free, for Ex zones

10 variants available

from £40.50 Excl. VAT

Coupling wrench B-C, special bronze, spark-free, for Ex zones

£45.00 Excl. VAT

Triangular scraper 200 mm, special bronze, spark-free, for Ex zones

£67.50 Excl. VAT

Your source of knowledge!

The DENIOS Newsletter

Expert tips and interesting facts.
Offers and promotions.
Regular new guides & user videos.

Subscribe to our newsletter

Non Sparking Tools

When working with commercially available steel tools, sparks may occur. Gas-air mixtures can be exploded by these sparks. In workspaces where these mixtures may or may already be present, the creation of flammable sparks must be avoided at all costs. The use of non sparking tools is only one but a very important measure in explosion prevention in the company. They consist of special alloys based on copper. However, the following instructions should be observed for your use.

Instructions for use

Even when using non sparking tools, the creation of sparks can never be completely ruled out. Therefore, the following measures are recommended:

Rusty or light metal painted surfaces should be wet with oil or water when working
Ideally, rust should be removed in advance
Ensure your workspace is well ventilated
Containers, apparatus and piping may need to be filled with inert gas
Take care that no sparks can be caused by falling objects
Ensure work wear is free from iron parts

Black exclamation mark on yellow triangle: "caution and utmost care advised".

Maintenance

Non-sparking tools are made of as few hard alloys as possible. For this reason, they are more sensitive than steelworks. This is to be considered when in use. If signs of wear and tear occur, it is advisable to wait for new tools and it is also important that each tool be used only for its intended purposes, not use chisel as crowbar or normal wrench as a blow key. Customers should pay attention to these precautions during maintenance:

Non-sparking tools made of copper-beryllium, e.g. For various reasons, scrapers, screwdrivers, pliers etc. must never be reground in the same way as steel tools
When heated above 250 ° C, the performance of the alloy copper beryllium is largely lost and the tool then only has the hardness of copper. It will be practically useless!

Therefore tools made of CuBe (copper beryllium) should only be ground wet. This prevents the dusts and vapors produced during grinding, the inhalation of which can be harmful to health. Wearing further protective clothing is mandatory. We do not recommend reforging tools made of CuBe!

View your order history
Save shopping list and basket
Save preferred payment method for future orders

First Name*

Last Name*

Email*

Password*

Repeat password*

VAT number

By registering as a customer of our webshop, you accept our General Terms and Conditions as the basis for contracts concluded via our webshop. Please also note our privacy policy. We will send you our information on similar products to the e-mail address indicated. You can object at any time by sending an e-mail to info@denios.co.uk or by clicking on the unsubscribe link.

Spark-free Tools for Ex Zones