Hazardous materials store SolidMaxx C 2.1

Product description

• For the storage of drums and IBCs on a small footprint for access close to production.
• For up to 8 x 205 litre drums or 2 x 1000 litre IBCs
• Approved for storage of water-polluting and flammable substances.
• Steel frames and spill pallet are powder coated (RAL 7043, black-grey). The wall elements are made of galvanised profile sheet metal or, in the thermally insulated version, of painted smooth sheet metal panels (RAL 9002, grey-white).
• On request with thermal insulation (50 mm) for walls and roof in mineral wool (ISO A - non-combustible) and heating for frost-free storage.
• Water law tested, one piece 5 mm spill pallet (to density 1.9 g/cm³) with easily removable hot dip galvanised grids (load capacity: 1250 kg/m²).
• When a PE inliner is fitted: galvanised fluid guides all around ensure any leaked substances are safely diverted to the spill pallet.
• Door equipment: 1-wing in narrow version or 2-wing in wide version.
• 100 mm clearance for access underneath using a hand operated electric stacker.
• Natural ventilation provided by weather-protected, all round openings.
• Security lock for protection against unauthorised access.
• Precise roof drainage via the sides (front and back).
• Crane eyes as standard for safe transport to the installation site.
• Optionally with overvoltage protection.

Structural analysis

The structural calculations for the technical room system are based on Eurocode 3 (EN 1993). The loads on the structure are measured according to Eurocode 1 (EN 1991-1-3) for a characteristic wind load qk,w = 0.585 kN/m² and a ground snow load sk = 2.5 kN/m². The structure is also designed for earthquake zone 3 according to EN 4149, EN 1998-1:2004.

Guidelines for storing flammable liquids

(flash point ≤ 60 ° C, classes H226, H225 and H224)

• Observe distance from fire loads (mostly min. 10 m)
• Create equipotential bonding (earthing) (connection point provided); if required provide lightning protection
• Country-specific requirements for air exchange rate
• Specifications in accordance with HSG71
• Specifications in accordance with ATEX Directive 2014/34/EU