Hazardous materials store MCV 2520

Product description

• Approved for storage of water-polluting and flammable substances.
• Enclosed construction with walls and roof in corrosion resistant galvanised and painted sheets (RAL 5010, gentian blue).
• On request with thermal insulation for walls (40 mm) and roof (50 mm) in mineral wool (ISO A - non-combustible) and heating for frost-free storage.
• Water law tested, one piece 5 mm spill pallet with easily removable hot dip galvanised grids (max. load capacity: 1,000 kg/m²).
• Low entry height of 150 mm.
• With 2-wing door (W x H: 2,000 x 2,000 mm), either on the short or long side of the room system in the steps provided. MCV 2520 only available with 2-wing door on the long side.
• Delivered as ready assembled system.
• Includes crane eyes for easy unloading.
• Natural ventilation available on request.
• 2-wing door (with safety lock) on the long side of the container

Structural analysis

The structural calculations for the technical room system are based on Eurocode 3 (EN 1993). The loads on the structure are measured according to Eurocode 1 (EN 1991-1-3) for a characteristic wind load qk,w = 0.585 kN/m² and a ground snow load sk = 2.5 kN/m². The structure is also designed for earthquake zone 3 according to EN 4149, EN 1998-1:2004.

Guidelines for storing flammable liquids

(flash point ≤ 60 ° C, classes H226, H225 and H224)

• Observe distance from fire loads (mostly min. 10 m)
• Create equipotential bonding (earthing) (connection point provided); if required provide lightning protection
• Country-specific requirements for air exchange rate
• Specifications in accordance with HSG71
• Specifications in accordance with ATEX Directive 2014/34/EU