Fire-rated storage container RFP 115 Li-Ion

Product description

• The space-saving solution for the safe storage of lithium energy storage devices.
• Install directly next to the external wall of neighbouring buildings or as a fire-rated separate area, e.g. in a production hall
• Steel spill pallet with removable hot dip galvanised grids (max. load capacity: 1,250 kg/m²).
• Long-lasting corrosion protection with fully-galvanised base material and high-quality 2K paint (RAL 9002, grey-white).
• Fire protection panels (A class material, non-combustible) with high insulation properties.
• Lockable, self closing 1-wing fire-rated EI₂ 90-C door to EN 13501-2, tested in accordance with EN 1634-1, or country-specific design (EI₁ 60 or EI₂ 120) with a door opening angle of 90 ° / 115 °.
• If required with up to three additional shelves.

Structural analysis

The structural calculations for the technical room system are based on Eurocode 3 (EN 1993). The loads on the structure are measured according to Eurocode 1 (EN 1991-1-3) for a characteristic wind load qk,w = 0.585 kN/m² and a ground snow load sk = 2.5 kN/m². The structure is also designed for earthquake zone 3 according to EN 4149, EN 1998-1:2004. With additional equipment up to wind load zone 4 with terrain category I (qk,w = 1.064 kN/m²) or up to ground snow load sk = 5.86 kN/m².

Roof drainage

Roof drainage channels rain water to the frame running around the edge and drains it away on the short sides either to the left or the right.