Electric vehicle quarantine container QEV
Item number: 274958W
- Storage and quarantine containers for accident-damaged, faulty and critical vehicles fitted with high-voltage batteries, as well as separate high-voltage batteries
- Usable for all electric car/van types - may also be used for e-trucks
- Base plate in S 355 edged 90° into the side wall
- Additional bottom frames, one piece each on approx. 2/3 of the container width between the main frames
- Multiple edge concave curve side walls in 3 mm S 355 on approx. 2/3 of the container height, reinforced by four vertical, symmetrically-arranged wide ribs
- Special internal coating in light grey; the exterior paint and roller tarpaulin cover are in RAL 7040
- Side frames adapted to the container contour
- Upper frame profile in MSH hollow profile 120 x 80 x 5 mm
- Permanent minimum tightness of the container up to filling height 1,200 mm
- Two 3" ball valves on the front wall with B-Storz coupling in stainless steel, drain valve directly above the floor plate, inlet at a height of approx. 1,000-1,500 mm
- Lockable viewing window above water level on the front side
- Water level gauge for determining the water volume
- Galvanised front steps
- Diagonally arranged ventilation plates in stainless steel at the top of the side walls
- 8 x 2.5t lashing eyes inside the container for load securing
Jump straight to:
Product description
- Storage and quarantine containers for accident-damaged, faulty and critical vehicles fitted with high-voltage batteries, as well as separate high-voltage batteries
- Usable for all electric car/van types - may also be used for e-trucks
- Base plate in S 355 edged 90° into the side wall
- Additional bottom frames, one piece each on approx. 2/3 of the container width between the main frames
- Multiple edge concave curve side walls in 3 mm S 355 on approx. 2/3 of the container height, reinforced by four vertical, symmetrically-arranged wide ribs
- Special internal coating in light grey; the exterior paint and roller tarpaulin cover are in RAL 7040
- Side frames adapted to the container contour
- Upper frame profile in MSH hollow profile 120 x 80 x 5 mm
- Permanent minimum tightness of the container up to filling height 1,200 mm
- Two 3" ball valves on the front wall with B-Storz coupling in stainless steel, drain valve directly above the floor plate, inlet at a height of approx. 1,000-1,500 mm
- Lockable viewing window above water level on the front side
- Water level gauge for determining the water volume
- Galvanised front steps
- Diagonally arranged ventilation plates in stainless steel at the top of the side walls
- 8 x 2.5t lashing eyes inside the container for load securing
Technical data
| Volume [m³] | 44 |
| Fill weight [kg] | 18000 |
| Net weight [kg] | 3755 |
| Features | Colour of the exterior paint and the roller tarpaulin cover as desired |
| Installation location | Indoors and outdoors |
| Material | Steel |
| Inner surface | painted |
Documents
Do you need help?
We work hard to give you good advice.
Free Expert Advice
01952 811991
Mon - Thu: 08:30 - 17:00 Fri: 08:30 - 16:00
Log in
- View your order history
- Save shopping list and basket
- Save preferred payment method for future orders
We would be pleased to provide you with advice!
Give us a call or fill out the form and we will get back to you as soon as possible.
Free technical assistance
01952 811991
01952 811991
01952 811991
Mon - Thu: 08:30 - 17:00 | Fri: 08:30 - 16:00
Use code DEN10 at checkout for 10% off ALL of our catalogue products. Cannot be combined with other promotions, discounts or other special prices. Does not apply to open quotations. IMPORTANT: our warehouse will close on the 17th of December, with the last date for dispatch being the 16th. It will reopen on the 2nd of January 2025.